Hydrodynamic Performance of A Porous-Type Land-Fixed Oscillating Water Column Wave Energy Converter     

Robert MAYON  NING De-zhi  ZHANG Chong-wei  Lars JOHANNING 《中国海洋工程》2022,36(1):1-14

A hybrid, porous breakwater-Oscillating Water Column(OWC) Wave Energy Converter(WEC) system is put forward and its hydrodynamic performance is investigated using the fully nonlinear, open-source computational fluid dynamics(CFD) model, OpenFOAM. The permeable structure is positioned at the weather side of the OWC device and adjoined to its front wall. A numerical modelling approach is employed in which the interstices within the porous structure are explicitly defined. This permits the flow fiel...  相似文献   

Buried pockmarks on the Top Chalk surface of the Danish North Sea and their potential significance for interpreting palaeocirculation patterns     

Samaneh Masoumi  Lars Reuning  Stefan Back  Alessandro Sandrin  Peter A. Kukla 《International Journal of Earth Sciences》2014,103(2):563-578

Three-dimensional (3D) seismic data from the southern Danish North Sea were used to analyse the morphology and spatial distribution of depressions in the Danian Chalk deposit. Previously, these depressions were either interpreted as karst structures or pockmarks. The observed depressions occur in an interval from 25 ms below to 12 ms above the Top Chalk surface. Three types of depressions were differentiated based on their plan-view geometry and their degree of symmetry: Type 1, comprising sub-circular and symmetrical depressions, is the dominant group (ca. 70 %). Type 2, elongated and symmetrical depressions, represents only a small fraction (ca. 5 %). The elongated and asymmetrical depressions of Type 3 compose ca. 25 %. In cross section, each depression type can be either characterised by a V- or a U-shape. The maximum size of the depressions ranges from 50 to 580 m, with an average internal depth of 10 m. We interpret the depressions as pockmarks formed by the expulsion of biogenic or thermogenic fluids at the Danian seafloor. Likely, the initial form of the pockmarks has been circular (Type 1) and was subsequently modified for Types 2 and 3 to an elongated form by currents. The long axis of the pockmarks is interpreted to represent the effective current direction. The inferred direction is sub-parallel to the palaeobathymetric contours. The 3D seismic interpretation of pockmarks presented in this paper contributes to the understanding of fluid migration and palaeocirculation patterns during the sedimentation of the terminal Chalk Group in the southern Danish North Sea.  相似文献   

Archean to Recent aeolian sand systems and their sedimentary record: Current understanding and future prospects     

Juan Pedro Rodríguez‐López  Lars B. Clemmensen  Nick Lancaster  Nigel P. Mountney  Gonzalo D. Veiga 《Sedimentology》2014,61(6):1487-1534

The sedimentary record of aeolian sand systems extends from the Archean to the Quaternary, yet current understanding of aeolian sedimentary processes and product remains limited. Most preserved aeolian successions represent inland sand‐sea or dunefield (erg) deposits, whereas coastal systems are primarily known from the Cenozoic. The complexity of aeolian sedimentary processes and facies variability are under‐represented and excessively simplified in current facies models, which are not sufficiently refined to reliably account for the complexity inherent in bedform morphology and migratory behaviour, and therefore cannot be used to consistently account for and predict the nature of the preserved sedimentary record in terms of formative processes. Archean and Neoproterozoic aeolian successions remain poorly constrained. Palaeozoic ergs developed and accumulated in relation to the palaeogeographical location of land masses and desert belts. During the Triassic, widespread desert conditions prevailed across much of Europe. During the Jurassic, extensive ergs developed in North America and gave rise to anomalously thick aeolian successions. Cretaceous aeolian successions are widespread in South America, Africa, Asia, and locally in Europe (Spain) and the USA. Several Eocene to Pliocene successions represent the direct precursors to the present‐day systems. Quaternary systems include major sand seas (ergs) in low‐lattitude and mid‐latitude arid regions, Pleistocene carbonate and Holocene–Modern siliciclastic coastal systems. The sedimentary record of most modern aeolian systems remains largely unknown. The majority of palaeoenvironmental reconstructions of aeolian systems envisage transverse dunes, whereas successions representing linear and star dunes remain under‐recognized. Research questions that remain to be answered include: (i) what factors control the preservation potential of different types of aeolian bedforms and what are the characteristics of the deposits of different bedform types that can be used for effective reconstruction of original bedform morphology; (ii) what specific set of controlling conditions allow for sustained bedform climb versus episodic sequence accumulation and preservation; (iii) can sophisticated four‐dimensional models be developed for complex patterns of spatial and temporal transition between different mechanisms of accumulation and preservation; and (iv) is it reasonable to assume that the deposits of preserved aeolian successions necessarily represent an unbiased record of the conditions that prevailed during episodes of Earth history when large‐scale aeolian systems were active, or has the evidence to support the existence of other major desert basins been lost for many periods throughout Earth history?  相似文献   

Fossilisation of a silica diagenesis reaction front on the mid-Norwegian margin     

Raluca Cristina Neagu  Joe Cartwright  Richard Davies  Lars Jensen 《Marine and Petroleum Geology》2010

The diagenetic transformation of biogenic silica from opal-A to opal-CT was recognised on seismic reflection data over an area of 78 × 10³ km² on the mid-Norwegian margin. The opal-A/CT diagenetic boundary appears as a positive, high amplitude reflection that generally cross-cuts the hosting stratigraphy. We demonstrate that it is not a sea bottom simulating reflection (BSR) and also that is not in thermal equilibrium with the present day isotherms. We present arguments that three styles of deformation associated with the opal-A/CT reflection – polygonal faulting, regional anticlines and synclines and differential compaction folding – indicate that the silica diagenesis reaction front is fossilised at a regional scale. Isochore maps demonstrate the degree of conformity between the opal-A/CT reflection and three seismic horizons of Late Miocene to Early Pliocene age that potentially represent the paleo-seabed when ‘fossilisation’ of the reaction front took place. The seismic interpretational criteria for recognition of a fossilised diagenetic front are evaluated and the results of our study are integrated with previous studies from other basins of the NE Atlantic in order to determine if the arrest of silica diagenesis was diachronous along this continental margin.  相似文献   

High‐pressure phase transitions of α‐quartz under nonhydrostatic dynamic conditions: A reconnaissance study at PETRA III          下载免费PDF全文

Eva‐Regine Carl  Ulrich Mansfeld  Hanns‐Peter Liermann  Andreas Danilewsky  Falko Langenhorst  Lars Ehm  Ghislain Trullenque  Thomas Kenkmann 《Meteoritics & planetary science》2017,52(7):1465-1474

Hypervelocity collisions of solid bodies occur frequently in the solar system and affect rocks by shock waves and dynamic loading. A range of shock metamorphic effects and high‐pressure polymorphs in rock‐forming minerals are known from meteorites and terrestrial impact craters. Here, we investigate the formation of high‐pressure polymorphs of α‐quartz under dynamic and nonhydrostatic conditions and compare these disequilibrium states with those predicted by phase diagrams derived from static experiments under equilibrium conditions. We create highly dynamic conditions utilizing a mDAC and study the phase transformations in α‐quartz in situ by synchrotron powder X‐ray diffraction. Phase transitions of α‐quartz are studied at pressures up to 66.1 and different loading rates. At compression rates between 0.14 and 1.96 GPa s^?1, experiments reveal that α‐quartz is amorphized and partially converted to stishovite between 20.7 GPa and 28.0 GPa. Therefore, coesite is not formed as would be expected from equilibrium conditions. With the increasing compression rate, a slight increase in the transition pressure occurs. The experiments show that dynamic compression causes an instantaneous formation of structures consisting only of SiO₆ octahedra rather than the rearrangement of the SiO₄ tetrahedra to form a coesite. Although shock compression rates are orders of magnitude faster, a similar mechanism could operate in impact events.  相似文献   

Extreme storms in Malmö, Sweden     

Lars Bengtsson  Stefan Milloti 《水文研究》2010,24(24):3462-3475

  相似文献   

Cosmic reionization by stellar sources: population III stars     

Aaron Sokasian  Naoki Yoshida  Tom Abel  Lars Hernquist  Volker Springel 《Monthly notices of the Royal Astronomical Society》2004,350(1):47-65

  相似文献   

Uranium-lead isotope systematics of Mars inferred from the basaltic shergottite QUE 94201     

Amy M. Gaffney  Lars E. Borg  James N. Connelly 《Geochimica et cosmochimica acta》2007,71(20):5016-5031

Uranium-lead ratios (commonly represented as ²³⁸U/²⁰⁴Pb = μ) calculated for the sources of martian basalts preserve a record of petrogenetic processes that were active during early planetary differentiation and formation of martian geochemical reservoirs. To better define the range of μ values represented by the source regions of martian basalts, we completed U-Pb elemental and isotopic analyses on whole rock, mineral and leachate fractions from the martian meteorite Queen Alexandra Range 94201 (QUE 94201). The whole rock and silicate mineral fractions have unradiogenic Pb isotopic compositions that define a narrow range (²⁰⁶Pb/²⁰⁴Pb = 11.16-11.61). In contrast, the Pb isotopic compositions of weak HCl leachates are more variable and radiogenic. The intersection of the QUE 94201 data array with terrestrial Pb in ²⁰⁶Pb/²⁰⁴Pb-²⁰⁷Pb/²⁰⁴Pb-²⁰⁸Pb/²⁰⁴Pb compositional space is consistent with varying amounts of terrestrial contamination in these fractions. We calculate that only 1-7% contamination is present in the purified silicate mineral and whole rock fractions, whereas the HCl leachates contain up to 86% terrestrial Pb. This terrestrial Pb contamination generated a ²⁰⁶Pb-²⁰⁷Pb array in the QUE fractions that appears to represent an ancient age, which contrasts with a much younger crystallization age of 327 ± 10 Ma derived from Rb-Sr and Sm-Nd isochrons (Borg L. E., Nyquist L. E., Taylor L. A., Wiesmann H. and Shih C. -Y. (1997) Constraints on Martian differentiation processes from Rb-Sr and Sm-Nd isotopic analyses of the basaltic shergottite QUE 94201. Geochim. Cosmochim. Acta61, 4915-4931). Despite the contamination, and accepting 327 ± 10 Ma as the crystallization age, we use the U-Pb data to determine the initial ²⁰⁶Pb/²⁰⁴Pb of QUE 94201 to be 11.086 ± 0.008 and to calculate the μ value of its mantle source to be 1.82 ± 0.01. The μ value calculated for the QUE 94201 source is the lowest determined for any martian basalt source, and, when compared to the highest values determined for martian basalt sources, indicates that μ values in martian source reservoirs vary by at least a factor of two. Additionally, the range of source μ values indicates that the μ value of bulk silicate Mars is approximately three. The amount of variation in the μ values of the mantle sources (μ ∼ 2-4) is greater than can be explained by igneous processes involving silicate phases alone. We suggest the possibility that a small amount of sulfide crystallization may generate greater extents of U-Pb fractionation during formation of the mantle sources of martian basalts.  相似文献   

Spalling Experiments on Large Hard Rock Specimens     

Lars?JacobssonEmail author  Karin?Appelquist  Jan?Erik?Lindkvist 《Rock Mechanics and Rock Engineering》2015,48(4):1485-1503

Specimens of coarse-grained Äspö diorite were axially compressed to observe stress-induced spalling. The specimens had a novel design characterized by two manufactured large radius notches on opposite sides. The tangential stress occurring in the notches aimed to represent the tangential loading around a circular opening. Fracture stages were monitored by acoustic emission measurements. Rock chips were formed similar to those found in situ, which indicates a similar fracture process. Slabs were cut out from the specimens and impregnated using a fluorescent material to visualize the cracks. The cracks were subsequently examined by the naked eye and by means of microscopy images, from which fracture paths could be identified and related to different minerals and their crystallographic orientations. The microscopy analyses showed how the stress field and the microstructure interact. Parallel cracks were formed 2–4 mm below the surface, sub-parallel to the direction of the maximum principal stress. The crack initiation, the roles of minerals such as feldspar, biotite and quartz and their grain boundaries and crystallographic directions are thoroughly studied and discussed in this paper. Scale effects, which relate to the stress gradient and microstructure, are discussed.  相似文献   

High‐resolution reconstruction of a coastal barrier system: impact of Holocene sea‐level change          下载免费PDF全文

Mikkel Fruergaard  Thorbjørn J. Andersen  Lars H. Nielsen  Peter N. Johannessen  Troels Aagaard  Morten Pejrup 《Sedimentology》2015,62(3):928-969

This study presents a detailed reconstruction of the sedimentary effects of Holocene sea‐level rise on a modern coastal barrier system. Increasing concern over the evolution of coastal barrier systems due to future accelerated rates of sea‐level rise calls for a better understanding of coastal barrier response to sea‐level changes. The complex evolution and sequence stratigraphic framework of the investigated coastal barrier system is reconstructed using facies analysis, high‐resolution optically stimulated luminescence and radiocarbon dating. During the formation of the coastal barrier system starting 8 to 7 ka rapid relative sea‐level rise outpaced sediment accumulation. Not before rates of relative sea‐level rise had decreased to ca 2 mm yr^?1 did sediment accumulation outpace sea‐level rise. From ca 5·5 ka, rates of regionally averaged sediment accumulation increased to 4·3 mm yr^?1 and the back‐barrier basin was filled in. This increase in sediment accumulation resulted from retreat of the barrier island and probably also due to formation of a tidal inlet close to the study area. Continued transgression and shoreface retreat created a distinct hiatus and wave ravinement surface in the seaward part of the coastal barrier system before the barrier shoreline stabilized between 5·0 ka and 4·5 ka. Back‐barrier shoreline erosion due to sediment starvation in the back‐barrier basin was pronounced from 4·5 to 2·5 ka but, in the last 2·5 kyr, barrier sedimentation has kept up with and outpaced sea‐level. In the last 0·4 kyr the coastal barrier system has been prograding episodically. Sediment accumulation shows considerable variation, with periods of rapid sediment deposition and periods of non‐deposition or erosion resulting in a highly punctuated sediment record. The study demonstrates how core‐based facies interpretations supported by a high‐resolution chronology and a well‐documented sea‐level history allow identification of depositional environments, erosion surfaces and hiatuses within a very homogeneous stratigraphy, and allow a detailed temporal reconstruction of a coastal barrier system in relation to sea‐level rise and sediment supply.  相似文献